Compatible with: Heatmiser neoStat v1 and neoStat v2.This is not compatible with neoAir v2/v3.Dimensions: 11cm x 11cm.

230v Powered.2 Wire Normally Closed.M30 Thread.Stroke Length 3.5mm +/- 0.5.No more than 1m length cable.

The gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device.Connects to your home broadband router and wirelessly to the neoStats in your home.No special computer knowledge is required, simply...

Designed for the neoAir to position the neoAir thermostat on a table.

35mm Metal Single gang back box.

35mm single gang plastic easy fix box.

Compatible with all Heatmiser Thermostats that accept remote sensors.The sensing element is mounted in "˜thimble' enclosure for surface mounting, typically on a backplate or a ceiling tile in the natural air flow of the room.The cable length is 2m.

Designed to work with UH8-RF v2 to disable cooling when the dew point temperature is reached.

Dimensions: 80Wx 80H x 22D mm

Can be used with selected other models to provide floor temperature limiting or remote air temperature monitoring.Comes with a 3 meter cable which can be extended to 20 meters if required.

Can be used with the Touch V2, Edge & Neo System to switch the heating off whenever a window or door is opened.With Touch v2 & Edge, it pairs directly; with the Neo System, it connects to neoHub Gen 2 before linking to the zone.

Works with Touch, Edge & Neo system.Can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.With Touch v2 & Edge, it pairs directly; with the Neo System, it connects to neoHub Gen 2 before linking...

Control your Appliances from anywhere.Auto / Manual Operating Mode.5/2 Day or 7 Day Operating Mode.4 Switching Times per day.Compatible with Geo Location & Recipe Function (iOS/Android).Apple Watch Compatible.Acts as a repeater for the Neo & RF System...

Designed to be used with Heatmiser UH8-RF v2, neoAir V2M & Heatmiser neoHub.It has a mechanical switch input for connection to a heat pump or physical switch.If the switch is open, the system defaults to cooling & when the switch is made, the system is...