British Pounds
GFS Plus Coil DN25x90m
First pipe-in-pipe CSST solution available in the UK.Pre-sleeved CSST system - no longer have to sleeve your CSST on-site.Suitable for use in unventilated voids.No joints & hot work required.The first pipe-in-pipe CSST holding a BSI kitemark.NHBC...
PMAX Coil DN32x75m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN32x90m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
GFS Coupling DN15
Compatible for use with GFS pipe systems only; not suitable for cross-brand installation.Material: Manufactured from DZR brass to EN 12164, with nickel plating for enhanced corrosion resistance.Safety Design: Unique 3-point push & seal safety mechanism,...
PMAX Coil DN20x45m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS CSST Contractor Kit DN15x10m
Ideal for those smaller projects that do not require longer length runs of CSST pipe such as;Boiler changes,Gas cooker & kitchen relocation,Fire pits,Gas BBQs,Awkward & unusual places - i.e lofts.The kit comes complete with;GFS CSST (DN15-DN32) coils in...
GFS Plus Coil DN25x75m
First pipe-in-pipe CSST solution available in the UK.Pre-sleeved CSST system - no longer have to sleeve your CSST on-site.Suitable for use in unventilated voids.No joints & hot work required.The first pipe-in-pipe CSST holding a BSI kitemark.NHBC...
GFS Standard CSST Coil DN20x30m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN32x60m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN32x75m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN20x30m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS CSST Contractor Kit DN15x5m
Ideal for those smaller projects that do not require longer length runs of CSST pipe such as;Boiler changes,Gas cooker & kitchen relocation,Fire pits,Gas BBQs,Awkward & unusual places - i.e lofts.The kit comes complete with;GFS CSST (DN15-DN32) coils in...
GFS Plus Coil DN25x60m
First pipe-in-pipe CSST solution available in the UK.Pre-sleeved CSST system - no longer have to sleeve your CSST on-site.Suitable for use in unventilated voids.No joints & hot work required.The first pipe-in-pipe CSST holding a BSI kitemark.NHBC...
GFS Standard CSST Coil DN20x15m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN32x45m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN32x60m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN15x90m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN15x90m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
GFS Standard CSST Coil DN32x45m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN15x75m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN15x75m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
GFS Standard CSST Coil DN32x30m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN15x60m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN15x60m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN15x45m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN32x15m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
GFS Standard CSST Coil DN15x45m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
PMAX Coil DN15x30m
GFS P-MAX® features an integrated containment sleeve which wraps around the inner GFS CSST.Can be installed in escape corridors, lobbies and protected shafts when installed in a continuous lengthNo joints & hot work required.Suitable for use in...
GFS Standard CSST Coil DN25x90m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
GFS Standard CSST Coil DN15x30m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
GFS Standard CSST Coil DN15x15m
Easy to bend and reduces the amount of fittings & materials needed, GFS CSST offers a high resistance to corrosionIt is a stainless steel metal hose with a corrugated construction, conforming to EN 10380 and produced in 316L (1.4404) stainless steel...
Fernox LP Sterox-Liquid 1L
Ideal for disinfecting stored water systems in all domestic or commercial properties.Effective against legionella & pseudomonas. Kills bacteria and algae.Once disinfection is complete, there is no need to flush out or neutralise the system.Compatible...
Fernox Boiler Noise Silencer F2 Express Aerosol 400ml
Quick and convenient to use - doses in 30 seconds - no need to drain down the system.Supplied with a range of dosing adapters and a fully controllable trigger mechanism for mess-free, no wastage dosing.High performance, non-toxic, environmentally...
Fernox Limescale Remover DS-3 30kg
Ideal for use to remove baked-on limescale deposits from domestic appliances and boiler heat exchangers.Removes limescale from any type of water heater to restore its efficiency, dissolving up to 50% of its own weight of limescale.A powerful but...
Fernox Boiler Noise Silencer F2 Liquid 500 ml
Reduces boiler and system noise.Improves heat transfer efficiency.Compatible with all Fernox Protectors.Can be left in the system permanently.Compatible with all metals and materials commonly used in central heating systems.One 500ml recyclable bottle...
Fernox Limescale Remover DS-3 2kg
Ideal for use to remove baked-on limescale deposits from domestic appliances and boiler heat exchangers.Removes limescale from any type of water heater to restore its efficiency, dissolving up to 50% of its own weight of limescale.A powerful but...
Fernox System Neutraliser Liquid 2L
Neutralises system water after using DS40 System Descaler & Cleaner.Conditions system for application of corrosion inhibitor.Ensures compliance with environmental regulations.Convenient to use 2 litre liquid for easy dosing with powerflushing units, or...
Fernox Heat Transfer Fluid HP-EG 20L
High performance heat transfer fluid for maximum protection against corrosion and scale to extend system longevity.Higher efficiency and lower viscosity than propylene glycol based products.Lower viscosity means less energy is used to pump the heat...
Fernox DS40 System Cleaner & Descaler-powder 2kg
Rapidly removes limescale, black sludge and other deposits.Restores circulation and improves heating efficiency.Free-flowing powder for easy use with powerflushing units, application via F&E tank or suitable dosing vessel.Turns yellow when product...
Fernox Heat Transfer Fluid HP-EG 10L
High performance heat transfer fluid for maximum protection against corrosion and scale to extend system longevity.Higher efficiency and lower viscosity than propylene glycol based products.Lower viscosity means less energy is used to pump the heat...
Fernox Power Cleaner F8 Liquid 500ml
Super strength, fast-acting cleaner for heavily contaminated, dirty and problem central heating systems.Citrate-based cleaner for use in heavily contaminated systems in accordance with BS 7593:2019.One bottle treats up to 130 litres, 16 radiators and 250...
Fernox Cleaner F3 Express Aerosol 400ml
Quick and convenient to use - doses in 30 seconds - no need to drain down the system.Neutral, universal cleaner for pre-commissioning new and existing heating systems.When used in conjunction with Protector F1 gas savings of up to 15% can be achieved...
Fernox Solar Cleaner 500ml
A concentrated universal cleaner designed for solar thermal systems.Removes degraded solar heat transfer fluids and sludge.Clears blockages quickly.Restores efficiency of existing systems.Non-foaming formulation for fast, easy removal from the system...
Fernox Cleaner F3 Liquid 265ml
One 500ml bottle treats 130 litre system, up to 16 radiators, or 250 sqm of underfloor heating.Removes sludge, limescale and other debris to restore energy efficiency and extend system and boiler life.When used in conjunction with Protector F1 gas...
Fernox Hawk White 400g
Pipe jointing compound for use in general applications.Suitable for Natural Gas, non potable water, steam, air (excluding medical lines) brine, alcohol and L.P. Gas.Complies with BS EN 751-2 Class A.Non-toxic and environmentally friendly.
Fernox Cleaner F3 Liquid 500ml
One 500ml bottle treats 130 litre system, up to 16 radiators, or 250 sqm of underfloor heating.Removes sludge, limescale and other debris to restore energy efficiency and extend system and boiler life.When used in conjunction with Protector F1 gas...
Fernox Hawk White 200g
Pipe jointing compound for use in general applications.Suitable for Natural Gas, non potable water, steam, air (excluding medical lines) brine, alcohol and L.P. Gas.Complies with BS EN 751-2 Class A.Non-toxic and environmentally friendly.
Fernox Protector + Filter Fluid F9 Express Aerosol 400ml
Designed for use with Fernox TF1 in-line system filters or other similar filters to aid the safe collection of corrosion, debris and scale via a filter.- Quick and convenient-doses in 30 seconds via radiator, filling loop or Fernox TF1 System Filter-no...
Fernox Hawk Jointing Compound 400g
A pipe jointing compound designed for use with hot and cold potable water.Suitable for potable water, Natural Gas, steam, air (excluding medical lines) brine, alcohol and L.P. Gas.WRAS - Approved Product.Non-toxic and environmentally friendly.Easy and...
Fernox DS-10 Dryside Cleaner 7kg
This proven dryside cleaner is for use with cascade boilers with copper heat exchangers, to help restore and optimise system efficiency.Dryside cleaner.Cleans the combustion surfaces of copper cascade boilers.After use, neutralise the system water before...
Fernox Hawk Jointing Compound 200g
A pipe jointing compound designed for use with hot and cold potable water.Suitable for potable water, Natural Gas, steam, air (excluding medical lines) brine, alcohol and L.P. Gas.WRAS - Approved Product.Non-toxic and environmentally friendly.Easy and...
Fernox Protector + Filter Fluid F9 Liquid 500ml
Unique inhibitor package with dispersant designed to lift and deliver circulating debris in the system to a system filter for safe collection and removal.Must be used only in conjunction with a system filter - provides premium protection against...
Fernox Magnetic Scale Reducer 22mm Compression
An in-line scale reducer to prevent the build-up of scale using magnetic principles.Single appliance protection.Compression ends connection with 15mm & 22mm options.A brass, nickel plated unit.Lasts for up to 10 yearsWRAS approved product.No need for an...
Fernox Protector F1 Express Aerosol 400ml
Protects against corrosion and scale in mixed metal central heating systems to prevent breakdown and premature boiler failure.Quick and convenient - doses in 30 seconds via radiator, filling loop or Fernox TF1 System Filter - no need to drain down the...
Fernox LS-X External Leak Sealer 50ml
Fast acting, silicone paste which is used as an effective external leak sealer and jointing compound.Ideal for use on compression joints and screwed fittings.Never sets rock hard, joints can easily be undone.Ready to use, no mixing required.Does not...
Fernox Magnetic Scale Reducer 15mm Compression
An in-line scale reducer to prevent the build-up of scale using magnetic principles.Single appliance protection.Compression ends connection with 15mm & 22mm options.A brass, nickel plated unit.Lasts for up to 10 yearsWRAS approved product.No need for an...
Fernox Protector F1 Liquid 265ml
Protects against corrosion and scale in mixed metal central heating systems to prevent breakdown and premature boiler failure.One 500ml bottle treats 130 litre system, up to 16 radiators, or 250 sqm of underfloor heatingStops frequent venting of...
Fernox Powerflow Flux 350g
Self cleaning - easy to apply.Effective soldering flux.WRAS approved product - suitable for potable water applications.Suitable for both lead containing and lead-free solder alloys.
Fernox Electrolytic Scale Reducer 22mm Compression
An in-line scale reducer to prevent the build-up of scale using electrolytic principles.Compression ends connection with 15mm & 22mm options.Whole house protection.A brass, nickel plated unit.No maintenance.Lasts for up to 10 years, dependent on water...
Fernox Protector F1 Liquid 500ml
Protects against corrosion and scale in mixed metal central heating systems to prevent breakdown and premature boiler failure.One 500ml bottle treats 130 litre system, up to 16 radiators, or 250 sqm of underfloor heatingStops frequent venting of...
Fernox Powerflow Flux 100g
Self cleaning - easy to apply.Effective soldering flux.WRAS approved product - suitable for potable water applications.Suitable for both lead containing and lead-free solder alloys.
GFS Pipe Sealant 50ml Box
Ideal for a wide range of applications in industrial & domestic plumbing systems.- 10 bottles in a box - 120 bottles in a cartoon.- WRAS, DVGW & EN751-1 Approved- Safe Nozzle, No Drips & Clean Application- Leak Proof & Fast Curing- Temperature Range from...
Isolating Valve CP - 22 mm
WRAS approved.Material: Brass.Finish: Chrome Plated.Size: 15mm & 22mm options.Warranty: 1 year.Application: Suitable for hot and cold water systems.
Washing Machine Valve/Dual Appliance Tee
WRAS approved.Brass, steel and plastic construction.Includes handles.15mm x 3/4" x 3/4".Warranty: 1 year.
Washing Machine Valve c/w Check Valve
WRAS approved.Brass, steel and plastic construction.Includes handles.Size: 15mm x 3/4".Warranty: 1 year.
Washing Machine Valve Tee
WRAS approved.Brass, steel and plastic construction.Includes handles.Size: 15mm x 3/4".Warranty: 1 year.
Washing Machine Valve Angle
WRAS approved.Brass, steel and plastic construction.Includes handles.Size: 15mm x 3/4".Warranty: 1 year.
Washing Machine Valve Straight
WRAS approved.Brass, steel and plastic construction.Includes handles.Size: 15mm x 3/4".Warranty: 1 year.
Isolating Valve CP HP
WRAS approved.Material: Brass.Finish: Chrome Plated (CP).Pattern: Heavy Pattern (HP).Size: 15mm.Warranty: 1 year.Application: Suitable for hot and cold water systems.
Isolating Valve Full Bore CP - 22 mm
WRAS approved.Material: Brass.Finish: Chrome Plated.Size: 15mm & 22mm options.Warranty: 1 year.Application: Suitable for hot and cold water systems.
Isolating Valve Full Bore CP - 15 mm
WRAS approved.Material: Brass.Finish: Chrome Plated.Size: 15mm & 22mm options.Warranty: 1 year.Application: Suitable for hot and cold water systems.
Isolating Valve CP - 15 mm
WRAS approved.Material: Brass.Finish: Chrome Plated.Size: 15mm & 22mm options.Warranty: 1 year.Application: Suitable for hot and cold water systems.